Rasa X installing issues in every way possible

Hi and welcome @Navaneetdatta

Try this: Rasa X runs with several Errors & Warnings - #4 by nik202

OR

If not, start with the fresh process.

Please follow these steps for the installation of ROS and Rasa X :slight_smile:

Note: You can ignore few steps, if you already performed it!

Please install Anaconda from Anaconda | Individual Edition , then create the conda environment using the following command

  1. conda create -n rasa3 python=3.8
  2. conda activate rasa 3

PS: If you using Linux, check the environment for the same.

Note: I’d recommend to create a fresh environment if not you can proceed with the next steps:

Note: If you are not able to install you can downgrade the pip version to 20.2

For Rasa Open Source:

`pip install rasa==2.8.1`
`pip install rasa-sdk==2.8.1'

check version rasa --version its install or not

For Installing basic project:

rasa init

then if you need

For Rasa-X Installation

pip install rasa-x==0.39.3 --extra-index-url https://pypi.rasa.com/simple

check rasa version rasa --version its install or not

You will see some error : ImportError: cannot import name ‘RowProxy’ from ‘sqlalchemy.engine’ Install

pip install SQLAlchemy==1.3.22 should fix it

If sanic related error: pip install sanic-jwt==1.6.0

delete .db (events and rasa ) if is showing alembic issue.

If you have any errors in-between please share with us.

Note: You will see the Event Loop Close error in the terminal, you can ignore that, its is a persistent issue with Rasa X, and the team is working on it.

I hope this will solve your issue. Good Luck!

@Navaneetdatta If you only need ROS, so please don’t install rasa x ok ? and if you are required please go ahead.

If you were able to solve this please do close this thread while marking the solution tick next to this thread.