# Validating user data

**URL:** <https://forum.rasa.com/t/validating-user-data/47552>\
**Category:** Rasa Open Source\
**Created:** [September 7, 2021, 1:56pm UTC](https://forum.rasa.com/t/validating-user-data/47552 "2021-09-07T13:56:21Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![AbuIshak](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/abuishak/32/23566_2.png) [@AbuIshak](https://forum.rasa.com/u/AbuIshak)\
**Post date:** [September 7, 2021, 1:56pm UTC](https://forum.rasa.com/t/validating-user-data/47552/1 "2021-09-07T13:56:21Z")

</div>

Say, I’ve a RASA chatbot running on messenger. I’ve install RASA on GCP VM using docker. The question is, When users interact with my chatbot how can I train those interactions? Thanks in advance for your help 🙂.

---

<div class="post-metadata">

**Author:** ![ChrisRahme](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/chrisrahme/32/15572_2.png) [@ChrisRahme](https://forum.rasa.com/u/ChrisRahme)\
**Post date:** [September 7, 2021, 3:20pm UTC](https://forum.rasa.com/t/validating-user-data/47552/2 "2021-09-07T15:20:37Z")

</div>

If you have Rasa X installed, you can easily see the user messages and their predicted intents in the [NLU Inbox](https://rasa.com/docs/rasa-x/user-guide/annotate-nlu-examples#annotating-in-the-nlu-inbox) tab.

If the detected intent is correct, you can click on ✅ to add it to the NLU data to reinforce this behavior. If not, you can correct it and click on ✅ to add it to the NLU data to correct this behavior.

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/rasa/original/3X/d/e/de5888a90bd7858bf329b5be12154baba81d2b3f.png)

This is useful because you can sort and filter messages by confidence (among others).

* * *

You can also directly annotate the NLU examples in the [Conversation Inbox](https://rasa.com/docs/rasa-x/user-guide/review-conversations#conversations-inbox) tab if you come across an error there.

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/rasa/original/3X/f/8/f89ae842490b97ac797f58ca08a2f3844b6a9822.png)

This is useful because you can sort and filter conversations by whether or not an unhappy intent or bad feedback slot was detected (among others).

---

<div class="post-metadata">

**Author:** ![nik202](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/nik202/32/16098_2.png) [@nik202](https://forum.rasa.com/u/nik202)\
**Post date:** [September 7, 2021, 3:33pm UTC](https://forum.rasa.com/t/validating-user-data/47552/3 "2021-09-07T15:33:17Z")

</div>

Adding to the @ChrisRahme suggestion, if you are even working on rasa open source, try add the image of rasa x docker image simultaneously, what ever chat you are doing with rasa open source, you will be able to see in NLU Inbox tab and even the training examples or even out of scope questions. Chris given you best use case example 👏, how you can validate data at the backend. Just you need to focus on confidence score for the out of scope questions.

---

<div class="post-metadata">

**Author:** ![AbuIshak](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/abuishak/32/23566_2.png) [@AbuIshak](https://forum.rasa.com/u/AbuIshak)\
**Post date:** [September 7, 2021, 3:52pm UTC](https://forum.rasa.com/t/validating-user-data/47552/4 "2021-09-07T15:52:22Z")

</div>

Thank you for your reply @ChrisRahme . Another question according to your answer, If I correct the incoming massages using rasa x, it will save as example of intent right? At the same time I’m developing my project on GitHub. Then how they sync each other?

---

<div class="post-metadata">

**Author:** ![ChrisRahme](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/chrisrahme/32/15572_2.png) [@ChrisRahme](https://forum.rasa.com/u/ChrisRahme)\
**Post date:** [September 7, 2021, 3:58pm UTC](https://forum.rasa.com/t/validating-user-data/47552/5 "2021-09-07T15:58:51Z")

</div>

> [@AbuIshak](#):
>
> If I correct the incoming message, it will be saved as an example of the intent, right?

That’s right

> [@AbuIshak](#):
>
> Then how do they sync with each other?

Rasa X has [Integrated Version Control](https://rasa.com/docs/rasa-x/user-guide/fix-problems#using-integrated-version-control) 🙂 ([tutorial](https://www.youtube.com/watch?v=CN_BMIFs_Js))

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/rasa/original/3X/3/3/33b716335040ea4ad512861531127cde401973b3.png)

---

<div class="post-metadata">

**Author:** ![AbuIshak](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/abuishak/32/23566_2.png) [@AbuIshak](https://forum.rasa.com/u/AbuIshak)\
**Post date:** [September 7, 2021, 4:07pm UTC](https://forum.rasa.com/t/validating-user-data/47552/7 "2021-09-07T16:07:28Z")

</div>

> [@ChrisRahme](#):
>
> Rasa X has [Integrated Version Control](https://rasa.com/docs/rasa-x/user-guide/fix-problems#using-integrated-version-control) 🙂 ([tutorial](https://www.youtube.com/watch?v=CN_BMIFs_Js))

I see. Thank you very much 🥰.

---

<div class="post-metadata">

**Author:** ![ChrisRahme](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/chrisrahme/32/15572_2.png) [@ChrisRahme](https://forum.rasa.com/u/ChrisRahme)\
**Post date:** [September 7, 2021, 4:07pm UTC](https://forum.rasa.com/t/validating-user-data/47552/8 "2021-09-07T16:07:35Z")

</div>

Happy to help 🙂 Please mark the answer as solution if you think it is useful.
