# Rasa X installing issues in every way possible

**URL:** <https://forum.rasa.com/t/rasa-x-installing-issues-in-every-way-possible/49140>\
**Category:** \[Deprecated\] Rasa X Community Edition\
**Created:** [November 10, 2021, 4:37am UTC](https://forum.rasa.com/t/rasa-x-installing-issues-in-every-way-possible/49140 "2021-11-10T04:37:23Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![nik202](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/nik202/32/16098_2.png) [@nik202](https://forum.rasa.com/u/nik202)\
**Post date:** [November 10, 2021, 10:15am UTC](https://forum.rasa.com/t/rasa-x-installing-issues-in-every-way-possible/49140/2 "2021-11-10T10:15:22Z")

</div>

Hi and welcome @Navaneetdatta

**Try this:** [Rasa X runs with several Errors & Warnings - #4 by nik202](http://forum.rasa.com/t/rasa-x-runs-with-several-errors-warnings/49006/4)

OR

If not, start with the fresh process.

Please follow these steps for the installation of ROS and Rasa X 🙂

**Note:** You can ignore few steps, if you already performed it!

Please install Anaconda from [Anaconda | Individual Edition](https://www.anaconda.com/products/individual) , then create the conda environment using the following command

1. conda create -n rasa3 python=3.8
2. conda activate rasa 3

**PS:** If you using Linux, check the environment for the same.

**Note:** I’d recommend to create a fresh environment if not you can proceed with the next steps:

**Note:** If you are not able to install you can downgrade the pip version to 20.2

**For Rasa Open Source:**

```auto
`pip install rasa==2.8.1`
`pip install rasa-sdk==2.8.1'

```

check version `rasa --version` its install or not

**For Installing basic project:**

`rasa init`

then if you need

**For Rasa-X Installation**

`pip install rasa-x==0.39.3 --extra-index-url https://pypi.rasa.com/simple`

check rasa version `rasa --version` its install or not

You will see some error : ImportError: cannot import name ‘RowProxy’ from ‘sqlalchemy.engine’ Install

`pip install SQLAlchemy==1.3.22` should fix it

If sanic related error: `pip install sanic-jwt==1.6.0`

delete .db (events and rasa ) if is showing alembic issue.

If you have any errors in-between please share with us.

**Note:** You will see the Event Loop Close error in the terminal, you can ignore that, its is a persistent issue with Rasa X, and the team is working on it.

I hope this will solve your issue. Good Luck!

@Navaneetdatta If you only need ROS, so please don’t install rasa x ok ? and if you are required please go ahead.

If you were able to solve this please do close this thread while marking the solution tick next to this thread.

---

_[View the full topic](https://forum.rasa.com/t/rasa-x-installing-issues-in-every-way-possible/49140)._
