# Rara Run Actions stuck on "Action endpoint is up and running on http://0.0.0.0:5055" **URL:** \ **Category:** Rasa Open Source\ **Created:** [April 14, 2022, 6:44am UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589 "2022-04-14T06:44:30Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![jessoares](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/jessoares/32/18651_2.png) [@jessoares](https://forum.rasa.com/u/jessoares)\ **Post date:** [April 14, 2022, 6:44am UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/1 "2022-04-14T06:44:30Z")
Hello. I am trying to load my assistant and test it using " rasa run actions & rasa shell nlu" but it seems stuck on " Action endpoint is up and running on [http://0.0.0.0:5055](http://0.0.0.0:5055)" ![image](https://europe1.discourse-cdn.com/flex013/uploads/rasa/original/3X/0/7/076c7bdb16f19849484228c430fb3479c77f2b33.png) I am using Rasa version 3.0 and my OS is Windows 10. Any help would be greatly appreciated. ---
**Author:** ![abhishekrathi](https://avatars.discourse-cdn.com/v4/letter/a/ce73a5/32.png) [@abhishekrathi](https://forum.rasa.com/u/abhishekrathi)\ **Post date:** [April 14, 2022, 12:50pm UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/2 "2022-04-14T12:50:46Z")
@jessoares You have to run both commands in separate terminals one with `rasa run actions` and other one with `rasa shell nlu` ---
**Author:** ![itsjhonny](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/itsjhonny/32/20201_2.png) [@itsjhonny](https://forum.rasa.com/u/itsjhonny)\ **Post date:** [April 14, 2022, 1:02pm UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/3 "2022-04-14T13:02:10Z")
Yeahh, but you can run together too using `&` or create an shell script @jessoares Everything working here. Tested in rasa 2.8 and rasa 3.1 this is my command (Linux/Mac) i think windows dont have “kill”, just remove it ```auto kill -9 $(lsof -t -i:5055) & kill -9 $(lsof -t -i:5005) & rasa run actions & rasa shell nlu ``` ```auto rasa run actions -p 5014 & rasa x --rasa-x-port 5015 --no-prompt --enable-api -p 5013 --log-file rasa.log --cors "*" -t ${RASA_TOKEN} ``` ---
**Author:** ![ChrisRahme](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/chrisrahme/32/15572_2.png) [@ChrisRahme](https://forum.rasa.com/u/ChrisRahme)\ **Post date:** [April 14, 2022, 4:47pm UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/4 "2022-04-14T16:47:18Z")
The command `x & y` means "run `x` and then if it succeeds run `y`. Of course, if `x` is `rasa run actions`, it will never end (because it needs to stay up), so `y` which is `rasa shell nlu` will never happen. ---
**Author:** ![itsjhonny](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/itsjhonny/32/20201_2.png) [@itsjhonny](https://forum.rasa.com/u/itsjhonny)\ **Post date:** [April 14, 2022, 5:10pm UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/5 "2022-04-14T17:10:21Z")
@ChrisRahme i think `&` running independent has any success - `&&`: command after `&&` is executed if, and only if, command before `&&` returns an exit status of zero. You can think of it as `AND` operator. - &: the shell executes the command terminated by & in the background, does not wait for the command to finish and immediately returns exit code 0 ---
**Author:** ![ChrisRahme](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/chrisrahme/32/15572_2.png) [@ChrisRahme](https://forum.rasa.com/u/ChrisRahme)\ **Post date:** [April 14, 2022, 5:18pm UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/6 "2022-04-14T17:18:14Z")
My bad, you’re right, I got confused with `&&` 🙂 But in any case, on Windows, whether it’s `x & y` or `x && y`, `y` will only execute after `x` finishes. What you were describing is their behavior on Linux, but OP is using Windows. ---
**Author:** ![itsjhonny](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/itsjhonny/32/20201_2.png) [@itsjhonny](https://forum.rasa.com/u/itsjhonny)\ **Post date:** [April 14, 2022, 5:25pm UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/7 "2022-04-14T17:25:34Z")
I didn’t know windows working different for `x & y` or `x && y` Thank 😊 ---
**Author:** ![jessoares](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.rasa.com/jessoares/32/18651_2.png) [@jessoares](https://forum.rasa.com/u/jessoares)\ **Post date:** [April 15, 2022, 5:23am UTC](https://forum.rasa.com/t/rara-run-actions-stuck-on-action-endpoint-is-up-and-running-on-http-0-0-0-0-5055/52589/8 "2022-04-15T05:23:31Z")
Indeed @ChrisRahme, i was expecting the command to run as it would in Linux, your explanation cleared things up. Thank you guys 🙂